|
Clearsep Technologies (I) Pvt. Ltd.
are the authorised marketing agents
in INDIA for patented and
revolutionary "MYCELX" infused
filter products manufactured by
MYCELX Technologies Corporation,
USA.
Essentially these"MYCELX" infused
filter products are used for
complete removal of oil traces /
hydrocarbon / grease / pesticides &
POPs (persistent organic
pollutants), organically bound
metals etc. from process /
wastewater / effluent water or any
similar streams in single pass with
an efficiency of 99.99%. And it does
so with the least pressure drop,
which is not normally more than 1
PSI.
How does it function?
How does MYCELX function? MYCELX filters are engineered to permanently remove hydrocarbons ranging from oil to gasoline from water. MYCELX instantly solubilizes the hydrocarbon compounds and bonds them into its surface,
keeping them from separating and emulsifying.
What are standard MYCELX products?
MYCELX Products: Beyond the Filter cartridges, Mycelx has a full line of oil spill remediation materials like Mycelx Filter sand, Mycelx Silakleen, Reverse Osmosis Protection Filters etc.
What are the materials captured by MYCELX ?
Aromatic Hydrocarbons (BTEX)
Aliphatic Hydrocarbons & Solvents
Crude oil & Fuel /Sheen
Cycloalkanes
Chlorinated Organics
Pesticides & POPs
Organic Polymers
Vegetable Oils & Animal Fats
Chelated Heavy Metals
Silicone Oil
Where can you use MYCELX Filters in your plant?
Ideally it can be used wherever oil traces / hydrocarbon are to be completely removed from water streams or similar streams. However some standard applications are
a Cooling towers & Heat exchangers a Pre & Post Reverse osmosis, Ultra Filtration & Ion Exchange
• Compressor Condensate • Boiler Blow down • Storm water
• Ground water
Remediation • Process water / waste water • Tank farms & Terminals etc.
Also MYCELX can be effectively in the following specific areas as well,
• polishing oil/water separator effluent down below discharge requirements
• treating tank "water bottoms" on site, in combination with other technologies
• treating rainwater / hydrocarbons inside loading rack enclosures
• treating hydrostatic test water following tank or pipe cleaning / repairing
• treating effluent from sludge dewatering
• treating truck wash waste stream in conjunction with other technologies
• treating construction site dewatering effluent & ground water following solids removal
• capturing spills on water including sheen
What
are the key features of MYCELX compared other 'polishing'
technologies
Key features that differentiate MYCELX products from other
" polishing " technologies :
•
permanently bonds hydrocarbons to the filters and spill products
(including sheen) due to MYCELX 's viscoelastic nature
•
single pass removal efficiency is 99.99%, regardless of flow
rates
•
fixed footprint for housings-small space required-can be adopted
for mobile use-simple installation-gravity flow capable
•
MYCELX is "fixed" in the filter - NO metering, NO
chemical handling and NO guess work
About this outstanding MYCELX polishing technology, one more interesting aspect is while capturing oil they hardly cause any pressure drop. Besides they do not have any limit to cumulative flow through the filters, limit is only for amount of oil to be captured. Once the cartridge gets saturated with oil, though it doesn't offer pressure drop even at this stage, it won't be able to capture oil any further and hence time to replace the cartridge.
To know more about MYCELX products we invite you to visit our principal's website at
www.mycelx.com and for any more information kindly be in touch with us if you are based in INDIA.
For your requirement of MYCELX products mail us at clearsep@vsnl.net
giving us details of your application, particularly about the flow rate, oil content, operating pressure & temperature etc.
|
